Syrp Genie Mini Motion Control Time-Lapse Kit  Rental

  • Syrp Genie Mini Motion Control Time-Lapse Kit
  • Syrp Genie Mini Motion Control Time-Lapse Kit on Slider Example

Syrp Genie Mini Motion Control Time-Lapse Kit  Rental

  • Up to 8.8 lb Payload
  • Includes 2 Genie Minis, Pan Tilt Bracket, Link Cables
  • 48 Hour Battery Life in Time-Lapse Mode
This item has been discontinued
Renting gear is easy
1Select Dates
  • Real-time inventory
  • Low or no deposit
2Gear Arrives
  • Free standard shipping ($149+)
  • Ship or pick up
  • Use top gear
  • Rent from 1-90 days
4Easy Returns
  • Repack in same box
  • We provide return label


The Syrp Genie Mini Motion Control Time-Lapse Kit comes with 2 motion control devices and a pan/tilt bracket. The Genie Mini is a small, simple, mobile-controlled device (requires the Syrp Genie app) that creates smooth panning for motion time-lapses or real-time video. It sits between your camera and a tripod (not includes) and has an internal motor that can perform 360° pans with cameras up to 8.8 lbs. With the included pan/tilt bracket, you can create dynamic 2-axis movements using both Genie Minis. You can also mount both the Minis and the bracket on the original Syrp Genie or on the Syrp Genie II for full 3-axis motion. The battery in the Genie Mini lasts over 48 hours in incremental time-lapse mode and can perform continuous motion (max speed is 360° in 33 seconds) for over 5 hours on a single charge. The following link cables are included with your rental: 2S, 1N, 1P, 3C, 3N, and 1C. A Link cable compatibility chart is located under the Product Manual section below.

Maximum Payload: 8.8 lbs (Panning), 6.6 lbs (Tilting)
Maximum Speed: 360° in 33 Sec
Ports: Micro-USB (for Charging), 2.5mm Link Port, 3.5mm Sensor Port
Dimensions: 3.6" x 1.6"
Weight: 8.1 oz
Additional Features:

  • 3 Hour Battery Charge Time
  • Approximately 48 Hour Battery Capacity in Time-Lapse Mode/5 Hours in Continuous Motion Mode
  • 1/4"-20 Mount on Top, 3/8"-16 Mount on Bottom

  • 2 x Genie Minis
  • Syrp Pan Tilt Bracket
  • Sync Cable for Genie Mini
  • 2 x Micro-USB Charging Cables
  • 2 x USB Wall Chargers
  • 4 x 1/4"-20 to 3/8"-16 Bushing Adapters
  • 6 x Syrp Link Cables:
    • 2S Link Cable for Select Sony Cameras
    • 1N Link Cable for Select Nikon, Fuji Cameras
    • 3N Link Cable for Select Nikon Cameras
    • 1C Link Cable for Select Fuji, Canon Cameras
    • 1P Link Cable for Select Panasonic, Leica Cameras
    • 3C Link Cable for Select Canon Cameras

(Link cable compatibility chart located under Product Manual section.)

Don't forget