Pocket Wizard CM-N3-P Motor Cable  Rental

  • Pocket Wizard CM-N3-P Motor Cable

Pocket Wizard CM-N3-P Motor Cable  Rental

  • 3.5mm Mono Mini-Phone to Canon N3
  • Pre-Trigger Switch
  • 3' Cable

Out Of Stock

$7.007 Day Rental
Renting gear is easy
1Select Dates
  • Real-time inventory
  • Low or no deposit
2Gear Arrives
  • Free standard shipping ($149+)
  • Ship or pick up
  • Use top gear
  • Rent from 1-90 days
4Easy Returns
  • Repack in same box
  • We provide return label


The Pocket Wizard CM-N3-P Motor Cable connects to any Canon camera with a 3-pin remote port. This cable runs between a standard Pocket Wizard trigger and your camera and allows you to control the shutter via radio using a second standard Pocket Wizard as a remote trigger. This is also a "pre-trigger" cable and has a switch that allows you to toggle half-press on or off at the remote camera's position (but not from the transmitting radio). When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. Note that this makes the camera respond more quickly and consistently but also consumes the camera's batteries much more quickly.

  • Length: 3'
  • Connections: 10-Pin to 3.5mm (1/8" Mono Mini-Phone)
  • Compatibility: Any Canon with a 3-Pin remote Port

  • Pocket Wizard CM-N3-P Motor Cable

  • Not recommended for use with the Pocket Wizard MultiMax, MiniTT1, or FlexTT5.

There is no manual for this product

Don't forget