DJI Ronin-MX Handheld Gimbal Stabilizer

The DJI Ronin-MX Handheld Gimbal Stabilizer improves on the Ronin-M by adding compatibility with the Matrice 600 aerial platform and increasing payload for use with larger cameras. An included universal mounting adapter allows it to be used with jibs, car mounts, and more while powerful motors help maintain stability and hold the horizon when mounted to an aircraft or other vehicle. The motors are silent to prevent mics from picking up any noise. The increased tilt-axis range improves your creative options and its lightweight magnesium build increases agility. The Ronin-MX is about 50% more powerful than the Ronin-M and sports additional stiffness to withstand wind. The included battery provides around 3 hours of operation. The Ronin-MX accepts only 1 battery at a time unless you use a Battery Power Distributor, which is not included. Two regulated 12V P-Taps, one 500mAh full-size USB connector, and a DJI Lightbridge connector enable connectivity and power to nearly every accessory a filmmaker might need. The DJI Ronin-MX 3-Axis Gimbal Stabilizer is engineered for professional and semi-pro filmmakers for sets both large and small.

• Ronin-MX Top Handle Assembly

• (2) Ronin-MX Screw-On S Crossbars

• Ronin-MX Tuning Stand

• Ronin Universal Camera Base Plate

• Ronin-MX Remote Transmitter

• (2) Flat 1/3"-20 Camera Screws

• (2) Flat 3/8"-16 Camera Screws

• Impact 3/8"-16 – 1/4"-20 Adapter Spigot

• (2) Adjustable Handle Bars for DJI Ronin Gimbal

• (2) 1/4"-20 Camera Screws for Gimbal

• (2) 3/8"-16 Camera Screws for Gimbal

• 3/16"-16 Allen Wrench

• 3mm Allen Wrench

• DJI Quick Swap Smart Battery

• Battery Charger

• Dual 15mm Rod Support for Ronin Gimbal

• (2) 3" 15mm Screw-On Rods

• 70mm Lens Support for Ronin

• 3' USB to Micro USB Cable

• Carrying Case

• Payload: Up to 10 lbs

• Dimensions Support (Including Handlebar): 14.6" Maximum Depth x 17.3" Maximum Height x 22" Maximum Width

• Bluetooth Compatible for Assistant Software Only

• Interface Connectivity for DJI Lightbridge

• ±0.02° Precision of Control

• Maximum Controlled Rotation Speed:

Pan Axis: 200°/s

Tilt Axis: 100°/s

Roll Axis: 30°/s

• Mechanical Endpoint Range:

Pan Axis Control: 360°

Tilt Axis Control: +270° to -150°

Roll Axis Control: ± 110°

• Controlled Rotation Range:

Pan Axis Control: 360°

Tilt Axis Control: +45° to -135°

Roll Axis Control: ± 25°

• Ports: 2 x 12V DC PowerTaps (DC Batteries Not Included), 1 x USB, 1 x DJI Lightbridge

• Modes: Upright Operation, Underslung Operation, Briefcase/Low-Profile Operation

• Weight (Including Handlebar): 6.11 lbs

Manual