The Pocket Wizard CM-N3-P Motor Cable connects to any Canon camera with a 3-pin remote port. This cable runs between a standard Pocket Wizard trigger and your camera and allows you to control the shutter via radio using a second standard Pocket Wizard as a remote trigger. This is also a "pre-trigger" cable and has a switch that allows you to toggle half-press on or off at the remote camera's position (but not from the transmitting radio). When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. Note that this makes the camera respond more quickly and consistently but also consumes the camera's batteries much more quickly.

• Pocket Wizard CM-N3-P Motor Cable

• Length: 3'

• Connections: 10-Pin to 3.5mm (1/8" Mono Mini-Phone)

• Compatibility: Any Canon with a 3-Pin Remote Port

There is no manual for this product.