The Sony HVL-F60M Flash is designed for both photographers and videographers. It has a high illumination output for both the flash and the continuous LED light. It features stroboscopic control, modeling light capabilities, radio wireless control, and the ability to sync with shutter speeds as fast as 1/4000th of a second. Note, however, that this flash does not have a PC-In port nor a 1/8th port for use with radio transmitters. You will need to use a Hot Shoe Adapter with a port (not included). Otherwise, this flash will fire off-camera optically. Also, the hot shoe on this flash is the Multi-Interface Shoe and will not work on iISO hot shoe cameras. Most Sony cameras released after September 12th, 2012 have the Multi-Interface Shoe.

• Sony HVL-F60M Flash with Built-In LED Video Light

• Soft Case

• Power: 1/1-1/256

• Recycle Time at 100%: 2.6-3.5 Seconds

• Guide Number: 60' (Tested at ISO 100, 105mm)

• Hot Shoe Type: Sony Multi-Interface

• Ports: Micro USB (For Firmware), Sync Terminal, DC-In Terminal

• Zoom Range: 24-105mm (15mm with Built-In Wide Panel)

• Flash Duration: 4.5 Milliseconds at Full Power

• Modes: P-TTL/ADI Metering, Manual, High Speed Sync, Slow Sync, Rear-Curtain Sync, High Speed Continuous Shooting

• Channel/Group Options: 3 Groups, Up to 4 Channels

• Wireless Options: 16.40' Optically via Built-In Wireless Control Signal Receiver (Requires Second Flash)

• Additional Features: Built-In 5500K LED Video Light (1200 Lux/6.5', Tested at ISO 3200/f/5.6), 150° Head, Built-In Bounce Card, Runs Off (4) AA Batteries (Not Included)

• Dimensions: 6" x 3" x 4"

• Weight: .99 lbs

Manual